产品参数：上模固定，下?？上虿僮魇曳较蚧?，镶嵌物件放置和成品顶出均在合模区外完成，适合各种高难度镶嵌物件的放置，操作安全性高。
| 机器型号 | Machine Type | Unit | TA-600S | ||||
| 射出系统 | INJECTION SYSTEM | 螺杆直径 | Screw Diameter | mm | 32 | 35 | 40 |
| 射出压力 | Injection Pressure | kgf/cm² | 2060 | 1717 | 1312 | ||
| 理论注射容积 | Theoretical Injection Volume | cm³ | 128 | 153 | 200 | ||
| 射出重量(PS) | Max.Shot Weight(PS) | g/oz | 134/4.7 | 160/5.7 | 210/7.4 | ||
| 射出速度 | Injection speed | cm/s | 6.4 | ||||
| 温度控制段数 | Number Of Temperature Control | zone | 3 | ||||
| 锁模系统 | CLAMPING SYSTEM | 锁模力 | Clamping Force | kn | 600 | ||
| 模柱间距 | Distance Between Tie Bar | mm | 470x340 | ||||
| 上模板尺寸 | Top Platen Size | mm | 620x490 | ||||
| 下模板尺寸 | Bottom Platen Size | mm | 655x540 | ||||
| 滑板尺寸 | Sliding Platen Size | mm | 450x490 | ||||
| 最小模厚 | Min.Mold Height | mm | 230 | ||||
| 开模行程 | Opening Stroke | mm | 220 | ||||
| 最大开模间距 | Max.Opening Distance | mm | 450 | ||||
| 顶出力量 | Ejector Force | kn | 22 | ||||
| 顶出行程 | Ejector Stroke | mm | 45 | ||||
| 油压电力 | ELECTRIC HYDRAULIC SYSTEM | 最大液压压力 | Max.Hydraulic Preesure | kgf/cm² | 140 | ||
| 油箱容量 | Oil Tank Capacity | L | 230 | ||||
| 油泵电机电力 | Pump Motor Power | kw | 7.5 | ||||
| 电热容量 | Barrel Heating Power | kw | 5.4 | ||||
| 总用电量 | Total Wattage | kw | 12.9 | ||||
| 其它 | OTHERS | 机器重量 | Machine Weight | kg | 2100 | ||
| 机器外形尺寸 | Machine Dimensions | m | 2.1x1.1x2.4 | ||||
